How to Make a Pizza Wheel
Step 1: Cut the blank to the correct Length
![](https://ncpens.com/home/wp-content/uploads/2024/07/Step1a-1024x768.jpg)
Step 3: Mount the blank onto the lathe
![](https://ncpens.com/home/wp-content/uploads/2024/07/Step2-1024x768.jpg)
Step 5: Friction polish applied for the finish. Trim turning off the lathe.
![](https://ncpens.com/home/wp-content/uploads/2024/07/74315503_2644086645648309_4959661459840696320_n-1024x768.jpg)
Step 2: Drill hole down the center of the blank
![](https://ncpens.com/home/wp-content/uploads/2024/07/Step1.jpg)
Step 4: Handle has taken shape with the use of a chisel and will undergo 5 grades of sanding, 150 to 600 grit.
![](https://ncpens.com/home/wp-content/uploads/2024/07/Step3-1024x768.jpg)
Step 6: Hardware attached and ready to use!
![](https://ncpens.com/home/wp-content/uploads/2024/07/Pizza_Cutter-rotated.jpg)